Product Guide
Location:
Product > Functional resins > Polyimide and Polyamide imide resins
Polyimide and Polyamide imide resins
View：186 –Addtime：2011-09-29
1. Features
PI-030 is a polyimide resin that can be converted into water-based by adding the amine and diluted by ring ethyl ketone. It offers high solid content, good insulation and oil swelling resistance.
2. General Physical Characteristics
Appearance: red brown liquid
Non-volatile-matter content (180℃/30min)：30±2%
Viscosity, 25℃：1500-2500cps
Solvent: NMP
3. Drying condition:
280℃×15min, special process conditions 160℃×30min
4. Use and Storage
According to Fire Control Law, Safety and Health Law and other regulations, pay attention to the following during using and storage:
a) Please operate under the conditions of no smoking and well-ventilate environment during using and curing.
b) The product uses low boiling point solvents, Please operate in well-ventilate environmentto avoid inhalation of solvent vapors.
Generally require a commitment on health and safety management according to law of labor safety and health when using
such solvents(solvent-products).
c) The product is considered hazard class 3. Please store and operate the product in accordance with relevant laws and regulations.
5. Storage stability: at least 12 months under normal condition in a sealed container.
6. Package: 20kgPlastic bucket
200kg Iron bucket
PI-030 is a polyimide resin that can be converted into water-based by adding the amine and diluted by ring ethyl ketone. It offers high solid content, good insulation and oil swelling resistance.
2. General Physical Characteristics
Appearance: red brown liquid
Non-volatile-matter content (180℃/30min)：30±2%
Viscosity, 25℃：1500-2500cps
Solvent: NMP
3. Drying condition:
280℃×15min, special process conditions 160℃×30min
4. Use and Storage
According to Fire Control Law, Safety and Health Law and other regulations, pay attention to the following during using and storage:
a) Please operate under the conditions of no smoking and well-ventilate environment during using and curing.
b) The product uses low boiling point solvents, Please operate in well-ventilate environmentto avoid inhalation of solvent vapors.
Generally require a commitment on health and safety management according to law of labor safety and health when using
such solvents(solvent-products).
c) The product is considered hazard class 3. Please store and operate the product in accordance with relevant laws and regulations.
5. Storage stability: at least 12 months under normal condition in a sealed container.
6. Package: 20kgPlastic bucket
200kg Iron bucket
【Back】
Copyright@2011 Innotek Technology (China) Ltd.